AGIS Power-Assist will turn most manual wheelchairs into caregiver-controlled powered manual wheelchairs. AGIS Power-Assist takes the strain out of pushing a heavy wheelchair user and makes easy work of ramps and gradients. This dual wheel AGIS Power-Assist can be easily fitted and removed within seconds, and adapts to fit most wheelchair sizes.
- Allows speed of up to 6.4KPH
- Travels up to 15KM on a full battery charge
- Easily fitted or removed within seconds
- PG Drives S-Drive controller features a fully programmable and comprehensive fault management system
- Push and slide-away battery removal slot
- Extremely portable, making transportation easy and simple
- Fits most standard wheelchairs up to 20” seat width
- Comes with a Carry Holdall with shoulder strap
- Simple to manoeuvre and reverse
- The Power-Assist has a powerful 200 watt, 24V motor, capable of coping with most terrains
- Maintenance free, airline friendly 24V 12ah valve regulated sealed lead acid battery pack
- 2A charger as standard for off-board charging
- Height adaptor brackets are available to allow the telescopic bar at the front of the power-pack to be installed at its standard height or at a new height approx. 2” (5cm) lower
- This is ideal for installation on wheelchairs, that have a higher or lower horizontal bar or lack a hemi-shape
- The brackets are supplied in pairs with all required fasteners
AT A GLANCE
| Scooter Size(LxWxH) | 880×400×390mm |
| Base Weight | 21.7KG |
| Battery Weight | 8.8KG |
| Total Weight | 30.5KG |
| Controller | VR2 50A |
| Rear Wheel | 4"×9"×2 / 100×225mm |
| Anti-tip Wheel | 4" / 100mm |
| Battery | 12V 20AH x 2pcs |
| Charger | 1.8A-OFF BOARD-HP1201-2B |
| Motor | 200W 4700RPM |
| Max Speed | 6.4KPH |
| Estimated Cruising Range | 15 ~ 20KM |
| Weight Capacity | 115KG |
| Max Climbing Angle | ＜6° |
| Country of Origin | Made in Taiwan |